|
Automatic vial cap sealing machine is designed to
seal aluminum caps of various sizes on the vials fed on the continuous
line. Change parts are available for different
sizes of caps and vial diameters.
The machine is fully automatic and its operation
is very simple.
The vials are fed by means of S.S. Slat Conveyor
to the pickup point of cap vibrater chute. A cap is picked up by the vial and the star wheel carries the vial under the
sealing head. The complete head assembly moves down and prefect closer
is achieved by the skirting rollers.
The movement of the vial is arranged from left to
right on the conveyor. Main drive motor. 1.0 H.P., 415 volts and
suitable starters. Pilot light is mounted on a panel board. Vial size
tolerance required for machine &
±/0.5 mm for vial dia and height.
The output caps of machine is 60 to 80 vials/min.
variable speed drive arranged.
One
All contact parts are made out of S.S. 304
quality and body cladded with S.S. 304, 18 gauge sheet. Stainless Steel parts polished as
matt finish by 120 grit.
EXTRA CHANGE PARTS
Star Plate & Back Guide with cap size Socket. 1 Set. |