29 - 35 Stations Press are specially designed to compress DS, Capsule & Oval shaped tablets of length 23 & 19 mm
respectively. Round tablets of diameter 23mm (25.4 mm on demand) can be compressed on 29
station press.
Force Feeders are provided to regulate
uniform flow of large volume of granules at high speed.
Force Feeders are with variable speed
drive to feed granules at desired rate.
Standard feed frames are also supplied
along with the machine. This facilitates in compressing certain products where force flow
feeders are not suitable. It can also be used as an alternative arrangement in case of
breakdown of force flow feeders.
Unique clutch system to start and stop
the machine to avoid abnormal load on the machine. Upper punch penetration system - This
facilities in setting of compression position in the Die.
For fluffy products where flashing takes place it can be set on the lower position of the
die.
For sticky product this can be set nearer to the top face of the die to avoid heavy
ejection load and friction. It also helps in avoiding flying of upper punches due to
vacuum.
Die life can be increased more than double by changing the position of compression.
- Upper Cam Tracks-Lowering and lifting are so designed to
lift the upper punches evenly from both sides. This helps in smooth running of machine and
prevents jumping of upper punches at high speed.
- Upper punches are covered with acrylic dust guards.
Lower punch seals can be provided, to
reduce jamming of lower punches to some extent.
Turret with key slots essential for
shaped tooling provided on 29,35 & 37 station press. (Optional on 45 & 47 Station
Press)
Machine is totally enclosed. This
reduces the noise level and prevents to & fro flow of dust between compression zone
and compression room
Large paint free compression zone to
meet GMP norms. Motor and gear box of feeder are fitted outside the compression zone on
top of the machine, which also facilities in maintenance.
All major controls outside the
compression area to meet GMP norms and easy to reach.
Electronic counter showing total output,
output per minute & RPM is provided on the control panel.
Anti vibration mounting provided hence
no foundation is required.
Top acrylic guards are interlocked to
prevent the machine being operated when the guards are open for safety purpose.
Riddhi Press is Double Rotary having
tablet collection on two side.
