DESCRIPTION
Seperation of solids from solids, liquids
from solids and gradation of materials in accordance with their sizes have always
presented problems, especially when large quantity of material is to be processed through
finer screens. In recent times the most important development that took place is the
replacement of the conventional reciprocating motion by the gyratory motion in sieving and
straining operation. Even if a particle is small it would pass through a screen only if
its configuration relating to the opening is favourable.
For a non-isometric particle, the axis
must be correctly aligned with respect to the place of screen and the centre of gravity of
the particle must be above the aperture at any instant. Further, the amount of material on
the screen should be such that passage of small particles is not obstructed by large
particles.
It is therefore necessary to impart
horizontal rotary motion to the particle by suitable means. Care also has to be taken to
ensure that such motions, particularly during dry sieving or grading operation, should not
be vigorous so as to cause size reduction of particles themselves or damage to the screen.
RIDDHI Sieving, Grading and Straining
Machine was specially developed with above design features to provide gyratory vibration
The amplitude of vibration is adjustable to suit processing needs.
Note : Due to Process of
Continuous product improvement, design & specification may be modified or upgraded without
notice.
APPLICATION
Chemicals, Pharmaceuticals, dyestuff and
pigments, ceramics, food products, detergents, cosmetics, pesticides and fertilizers,
paper pulp, resins, paints, polyester chips, minerals, rubber compounds, slurries, metal
powders.
TECHNICAL
SPECIFICATIONS |
| Model |
RMS-20 |
RMS-30 |
| Motor |
2HP/1400 RPM/440V |
2HP/1400RPM/440V |
| Energy Consumption |
1.2kw |
1.5kw |
| Charging Ht. |
1190mm |
1190mm |
| Discharging Ht. |
750 mm |
750mm |
| Foundation |
Not required |
Not required |
| Overall Dimensions |
900x900x1200mm |
900x900x1200 mm |
| Net wt. |
300Kgs. |
320Kgs. |
| Gross Wt. |
420
Kgs. |
450
Kgs. |
| Capacity / Hour |
20-100Kgs* |
30-300
Kgs* |
*Depending upon Material properties & Screen size |
SALIENT FEATURES
Portable and Compact.
Lower energy consumption compared to
reciprocating vibratory system.
Standard machines are with TEFC motor.
Explosion proof/ Flame proof motor optional.
All contact parts and screen of 304 AISI
Stainless Steel material.
SS 316 quality contact parts optional.
Optional accessories Brushing arrangements,
S.S. Lid with charging port Aluminium ring and SS tie rod for fixing screen finer than 100
mesh.
Easy dismantling and cleaning facility for
contact parts.
Wide range of screen size 4-300 mesh.
Depending upon material properties and screen size.
GMP (Totally covered by SS) is available
|
